Supported standards

Society of Protective Coatings, SSPC-CS 23.00 / American Welding Society C2.23M / National Association of Corrosion Engineers, NACE No. 12: Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel

ISO 2063: Metallic and other inorganic coatings – Thermal spraying. Zinc, aluminum and their alloys, International Standard, ANSI

Metal Sprayed Coatings for Corrosion Protection Aboard Naval Ships: MIL-STD-2138A

Thermal Spraying: New Construction and Maintenance: EM 1110-2-3401: U.S. Army Corps of Engineers

Thermal Spraying -Practice, Theory, and Application: American Welding Society

Coating System Guide No. 23 –Guide for Thermal Spray Metallic Coating Systems: Society for Protective Coatings (SSPC)

Canadian/British Specifications: CSA Standard G189-1966; British Standard 2569, Part 1

ISO 14918: Approval testing of thermal sprayers

ASTM B833-93: Standard Specification for Zinc Wire for Thermal Spray, American Society for Testing and Materials.

ASTM A780-90: Standard Practice for Repair of Damaged and Uncoated Areas of Hot Dip Galvanized Coatings, American Society for Testing and Materials.

ASTM C633: Standard Test Method for Adhesion or Cohesive Strength for Flame Sprayed Coatings, American Society for Testing and Materials.

ANSI/AWS C2.20-9X: Specification for Zinc ThermalSpray Coatings for Reinforced Concrete, American Welding Society.

ANSI/AWS A533-9X: Specification for Alloy Wires, Cored Wire and Ceramic Rods for Thermal Spraying, American Welding Society.

ANSI/AWS C2.18.93: Guide for the Protection of Steel with Thermal Spraying Coating of Aluminum and Zinc, American Welding Society

Mill 6712C: Military Specification, Wire, Metallizing.